Epson PX-404A Error 0xD2
The Epson PX-404A is a highly efficient printer that ensures smooth printing processes. However, there may be instances where an error code 0xD2, accompanied by the message “CR LOAD POSITION driving time error” appears on the printer’s display. This error typically indicates a CR encoder failure, tooth skip, improper tension of the timing belt, or carriage overload.
A CR encoder failure refers to a problem with the printer’s encoder, which measures the position of the carriage to ensure precise printing. If the encoder fails, it may result in an incorrect carriage position, leading to the error code 0xD2.
A tooth skip or improper tension of the timing belt can also contribute to this error. The timing belt is responsible for synchronizing the movement of the carriage. If there is a tooth skip or the belt’s tension is not adjusted correctly, it can affect the carriage’s movement and trigger the error.
Furthermore, a carriage overload could be the cause of this error code. When the carriage is overloaded with excessive weight from objects placed on its path or if it is obstructed, it can lead to the printer’s malfunction.
To troubleshoot this issue, first, ensure that the printer’s power is turned off and disconnect it from the power source. Check for any obstacles on the carriage’s path and remove them if present. Examine the timing belt for any signs of damage or looseness and tighten or replace it if necessary. Additionally, clean the encoder sensor and ensure it is functioning correctly. If the issue persists, it is recommended to contact Epson’s customer support for further assistance.
In conclusion, error code 0xD2 on the Epson PX-404A printer indicates a CR LOAD POSITION driving time error caused by CR encoder failure, tooth skip or improper tension of the timing belt, or carriage overload. Following the troubleshooting steps mentioned above can help resolve the issue and restore the printer’s functionality.
| Printer Model | Epson PX-404A |
| Error Code | 0xD2 |
| Display on | PRINTER |
| Description and troubleshooting | CR LOAD POSITION driving time error. CR encoder failure. Tooth skip or improper tension of the timing belt. Carriage overload. |
