Epson PX810FW Error Ox BA
Epson PX810FW Error Code Ox BA Display on Printer: Ink Device Error, Troubleshooting Guide
If you encounter the Epson PX810FW error code Ox BA on your printer’s display, it indicates various ink-related issues. This error can be caused by ink cartridge failure, problems with the holder board assembly (CSIC or contact failure), main board failure, or cable/FFC disconnection. Here, we will provide a troubleshooting guide to help you resolve these issues and get your printer functioning properly again.
Firstly, start by checking the ink cartridges. Remove and reinstall them to ensure they are properly seated. If the problem persists, try using a different set of ink cartridges to determine if the issue lies with the cartridges themselves.
Next, inspect the holder board assembly. Ensure that the CSIC (Cartridge Serial Interface Chip) and contacts are clean and free from any debris. Gently clean them using a lint-free cloth or cotton swab dipped in isopropyl alcohol if necessary. If the problem persists, it could indicate a failure with the holder board assembly, and replacement may be necessary.
If none of the previous steps resolve the error, it is possible that there is a main board failure. In such cases, contacting Epson customer support or a certified technician for further assistance is recommended. They will be able to diagnose the exact issue and provide appropriate solutions.
Lastly, check for any cable or FFC disconnections. Ensure that all cables connecting the printer components are securely plugged in and undamaged. If you find any loose or damaged cables, reconnect or replace them accordingly.
By following these troubleshooting steps, you can rectify the Epson PX810FW error code Ox BA and get your printer back in working condition. However, if the issue persists, it is advisable to seek professional help to avoid further complications.
| Printer Model | Epson PX810FW |
| Error Code | Ox BA |
| Display on | PRINTER |
| Description and troubleshooting | Ink device error. Ink cartridge failure. Holder board assy failure (CSIC or contact failure). Main board failure. Cable or FFC disconnection. |
