Epson EW-M660FT Error 0xC4
Epson EW-M660FT Error code 0xC4 is a common issue that users may encounter while operating their printers. This error usually indicates an ink device error, ink cartridge failure, or holder board assembly failure, specifically related to the CSIC or contact failure. Additionally, it can also arise due to a main board failure or cable/FFC disconnection.
When faced with this error, there are a few troubleshooting steps that can be taken to resolve the issue. Firstly, ensure that the ink cartridges are properly installed and seated in their designated slots. Gently remove and reinsert them if necessary, making sure they are securely placed.
It is also recommended to clean the printer’s contact points, including those on the ink cartridges and holder board assembly. Wipe them gently with a lint-free cloth to remove any dust or dirt that may be causing the connection failure.
If the error persists, it is advisable to check the printer’s main board. In some cases, a faulty main board can trigger this error message. If you suspect this to be the issue, contacting an authorized service technician or Epson support for further assistance is recommended.
Lastly, inspect the printer’s cables and FFC (Flexible Flat Cable) connections. Ensure that all cables are properly connected and not loose or damaged. Reconnecting or replacing any faulty cables may help resolve the error.
If the aforementioned steps do not resolve the issue, it is advised to seek professional help or contact Epson customer support for further guidance. They will be able to provide specific troubleshooting steps based on your printer model and error code.
| Printer Model | Epson EW-M660FT |
| Error Code | 0xC4 |
| Display on | PRINTER |
| Description and troubleshooting | Ink device error. Ink cartridge failure. Holder board assy failure (CSIC or contact failure). Main board failure. Cable or FFC disconnection. |
