Epson PX-S381L Error 0x008E
Description and Troubleshooting of Epson PX-S381L Error Code 0x008E Display on Printer
If you own an Epson PX-S381L printer and encountered the error code 0x008E displaying on your printer, this article aims to provide you with a detailed description of the error and troubleshooting steps to resolve the issue.
The error code 0x008E on Epson PX-S381L printer indicates the “STK PID excess speed error.” This error occurs when the printer fails to read the Stacker motor encoder, causing disruptions in its functionality. Several factors can contribute to this error, including contamination of the Stacker motor encoder scale, a damaged FFC (Flexible Flat Cable), sensor failure, failure of the Stacker motor, or even a failure of the main board.
To troubleshoot this error, follow these steps:
1. Check for any contamination on the Stacker motor encoder scale. If you notice any dirt or debris, carefully clean it and ensure it is free from any obstructions.
2. Inspect the FFC for any signs of damage. If it appears to be damaged or worn out, it might need replacement. Contact an authorized service provider for assistance.
3. Test the printer’s sensors to ensure they are functioning correctly. Refer to the printer’s user manual for guidance on how to perform sensor tests.
4. Verify the Stacker motor’s operation by checking if it spins freely. If it doesn’t, it may need to be replaced.
5. In case none of the above steps resolve the issue, consider contacting Epson customer support or an authorized technician for further assistance. They will be able to diagnose any potential failure in the main board and provide appropriate solutions.
It is advisable to perform these troubleshooting steps carefully and, if necessary, consult professional help to avoid any further damage to your printer.
| Printer Model | Epson PX-S381L |
| Error Code | 0x008E |
| Display on | PRINTER |
| Description and troubleshooting | STK PID excess speed error. Failed to read the Stacker motor encoder. Contamination of the Stacker motor encoder scale. Damaged FFC. Sensor failure. Failure of the Stacker motor. Failure of the main board. |
