Epson ME-Office-940 Error 0xC6
The Epson ME-Office-940 is a versatile printer that offers efficiency and reliability. However, there are instances when you might encounter an error code 0xC6 displayed on the printer. This error is associated with ink device failure, ink cartridge issues, holder board assembly failure, main board failure, cable disconnection, or FFC disconnection.
When facing an ink device error, it is crucial to troubleshoot the problem promptly. The first step is to ensure that the ink cartridges are properly installed and that they have sufficient ink levels. If they are low, replace them with genuine Epson cartridges.
If the ink cartridges are not the issue, the next possible cause is a failure in the holder board assembly or the CSIC (Contact Sensor Input Circuit). In this case, it is recommended to contact Epson customer support for assistance. They will guide you on possible solutions and may arrange for a repair or replacement.
Another probable cause is a main board failure. To determine if this is the case, try restarting the printer and check if the error persists. If it does, then a main board failure is likely, and professional assistance will be required.
Additionally, cable or FFC (Flexible Flat Cable) disconnection can also trigger the error code 0xC6. In such a scenario, inspect the cables for any loose connections and securely reconnect them if necessary.
In conclusion, encountering error code 0xC6 on your Epson ME-Office-940 printer can be frustrating, but with the appropriate troubleshooting steps, you can pinpoint and resolve the issue. Remember to check ink levels, contact customer support for assistance with board or cartridge failures, and ensure all cables are securely connected. Rest assured, Epson is committed to providing excellent support to resolve any technical difficulties users may face with their printers.
| Printer Model | Epson ME-Office-940 |
| Error Code | 0xC6 |
| Display on | PRINTER |
| Description and troubleshooting | Ink device error. Ink cartridge failure. Holder board assy failure (CSIC or contact failure). Main board failure. Cable or FFC disconnection. |
