Epson ET-3700 Error 0x008D
The Epson ET-3700 printer is a reliable and efficient device that offers high-quality printing. However, like any electronic equipment, it may encounter errors from time to time. One common error code that users may come across is 0x008D, which displays on the printer. This error is specifically related to the Stacker motor, and it indicates an excess load on the STK PID mechanism.
The primary cause of this error is an overload of the Stacker motor mechanism, which can occur due to various reasons. One possible cause is broken gears within the motor, which can prevent it from running smoothly during operations. Another potential cause is an encoder error, where the motor’s encoder fails to provide accurate position information, leading to erratic behavior.
In some cases, contamination of the Stacker motor encoder scale can also result in this error. Dust or debris on the encoder scale can interfere with its operation, causing the motor to malfunction. Additionally, the issue may be attributed to a failure of either the Stacker motor or the main board of the printer.
Fortunately, troubleshooting this error can be done by performing a few simple steps. Firstly, check for any visible debris or contamination on the Stacker motor encoder scale, and clean it, if necessary. If the gears appear broken or damaged, they may need to be replaced. Another troubleshooting step involves ensuring that all connections are secure and the Stacker motor is properly seated.
If these steps do not resolve the issue, it is recommended to contact Epson support or a professional technician for further assistance. They will be able to accurately diagnose the problem and provide a suitable solution, whether it involves replacing any faulty parts or repairing the main board if required.
| Printer Model | Epson ET-3700 |
| Error Code | 0x008D |
| Display on | PRINTER |
| Description and troubleshooting | STK PID excess load error. The Stacker motor stopped running in the middle of the operation. Overload of the mechanism. Broken gears. Encoder error. Contamination of the Stacker motor encoder scale. Failure of the Stacker motor. Failure of the main board. |
