Epson EW-M660FT Error 0x41
Epson EW-M660FT Error code 0x41 is a common issue that users may encounter when using the scanner. This error is displayed as “Scanner/ADF FB PID excess speed error” and is related to several potential causes, including encoder failure, tooth skip or improper tension of the timing belt, motor driver failure, and main board failure.
One possible cause for the error code 0x41 is encoder failure. The encoder is responsible for providing information on the position of the scanning head. If it fails, the scanner may experience difficulties in accurately positioning the head, resulting in the error code.
Another cause could be tooth skip or improper tension of the timing belt. The timing belt is responsible for the movement of the scanning head. If there are issues with the belt, such as skipping teeth or improper tension, it can lead to the error code 0x41.
Motor driver failure is another potential cause. The motor driver controls the movement of the scanning head and any failure in this component can result in the error code being displayed.
Lastly, the error code can also be caused by a main board failure. The main board is the central component of the scanner and any malfunction in its circuitry can lead to various errors, including the 0x41 error code.
To troubleshoot this error, it is recommended to first check if any visible issues are present with the timing belt, encoder, or motor. If any abnormalities are found, they may need to be repaired or replaced. If no visible issues are found, it is advisable to contact Epson customer support for further assistance, as a main board failure may be the underlying cause.
In conclusion, Epson EW-M660FT Error code 0x41 is an error related to various factors, including encoder failure, timing belt issues, motor driver failure, and main board failure. It is necessary to identify the specific cause and undertake appropriate troubleshooting measures to resolve the error.
| Printer Model | Epson EW-M660FT |
| Error Code | 0x41 |
| Display on | SCANNER |
| Description and troubleshooting | Scanner/ADF FB PID excess speed error. Encoder failure. Tooth skip or improper tension of the timing belt. Motor driver failure. Main board failure. |
