Epson WF-5790 Error 0x0016
The Epson WF-5790 is a high-quality printer that occasionally encounters an error code 0x0016, which is displayed on the printer. This error code is related to a CR PID excess speed error, CR encoder failure, tooth skip or improper tension of the timing belt, cable or FFC disconnection, motor driver failure, or main board failure. In this article, we will provide a description of the error and troubleshooting steps to help resolve it.
The CR PID excess speed error indicates that the printer’s CR (carriage) unit is moving too quickly. This can be caused by various issues, including an encoder failure. The encoder is responsible for providing feedback on the position of the carriage, and if it malfunctions, it can lead to this error. Additionally, a tooth skip or improper tension of the timing belt can cause the carriage to move unevenly, triggering the error.
To troubleshoot this error, start by turning off the printer and disconnecting the power cord. Check for any loose or disconnected cables, particularly the FFC cable that connects the CR unit with the main board. Reconnect any loose cables securely. Inspect the timing belt for any signs of damage or tension problems. If necessary, adjust the tension or replace the belt.
If the error persists after these steps, there may be a motor driver or main board failure. In such cases, it is recommended to contact Epson support or a qualified technician for assistance. They will be able to further diagnose the issue and provide the necessary repairs or replacements.
In conclusion, the Epson WF-5790 error code 0x0016 relates to a range of potential causes, including CR PID excess speed error, CR encoder failure, timing belt issues, cable or FFC disconnection, motor driver failure, or main board failure. By following the troubleshooting steps mentioned above, you can rectify the error and get your printer back to optimal functionality.
| Printer Model | Epson WF-5790 |
| Error Code | 0x0016 |
| Display on | PRINTER |
| Description and troubleshooting | CR PID excess speed error. CR encoder failure. Tooth skip or improper tension of the timing belt. Cable or FFC disconnection. Motor driver failure. Main board failure. |
