Epson RX580 Error 0xC4
Epson RX580 Error code 0xC4 is a common issue experienced by users when using the printer. This error is typically displayed on the printer’s screen and indicates an ink device error or ink cartridge failure. It can also be caused by a failure in the holder board assembly, which includes issues with the CSIC (Cartridge Safety Identification Circuit) or contact failure. In some cases, the main board of the printer might be the culprit behind this error. Additionally, cable or FFC (Flexible Flat Cable) disconnection can also trigger error code 0xC4.
To troubleshoot and resolve this error, there are a few steps you can follow. Firstly, ensure that the ink cartridges are installed correctly and securely in their designated slots. Check for any signs of damage or wear on the cartridge itself. If the problem persists, try removing and reseating the cartridges to establish a secure connection with the printer.
If the above steps do not resolve the issue, the next troubleshooting step involves checking the holder board assembly. Inspect the CSIC chip and ensure it is clean and not damaged. If necessary, carefully clean the contacts to remove any dirt or debris. Similarly, examine the contact points on the printer and ensure they are clean and undamaged.
In some cases, the error code could be caused by a failure in the main board or a disconnection in the cables or FFC. In such instances, it is recommended to consult a professional technician or contact Epson support for further assistance.
In conclusion, error code 0xC4 on the Epson RX580 printer indicates ink device error, cartridge failure, holder board assembly failure, main board failure, or cable disconnection. By following the troubleshooting steps mentioned above, you can potentially resolve the issue and get your printer functioning properly again.
| Printer Model | Epson RX580 |
| Error Code | 0xC4 |
| Display on | PRINTER |
| Description and troubleshooting | Ink device error. Ink cartridge failure. Holder board assy failure (CSIC or contact failure). Main board failure. Cable or FFC disconnection. |
