Epson XP-7100 Error 0x0084
The Epson XP-7100 printer may encounter an error code 0x0084 with the message “PNL LOAD POSITION excess speed error” displayed on the printer. This error is typically associated with several underlying issues including Panel Encoder failure, Motor driver failure, Main board failure, or Tooth skip of the panel gears.
In the case of Panel Encoder failure, the component responsible for accurately determining the position of the panel may be malfunctioning. This can result in the printer exceeding the recommended speed limit, triggering the error code. Similarly, a Motor driver failure occurs when the motor that controls the movement of the panel encounters an issue, leading to the excess speed error.
Main board failure is another possible cause which occurs when the main circuit board of the printer fails to communicate and control the panel properly. Lastly, a Tooth skip of the panel gears can occur when one or more teeth on the panel gears are skipped during operation, causing the printer to operate at an incorrect speed and resulting in the error code.
To troubleshoot these issues, it is advisable to first power off the printer and unplug it from the power source for a few minutes. Restart the printer to see if the error code persists. If it does, it is recommended to contact Epson support for further assistance. They can provide specific troubleshooting steps based on the error code 0x0084 and help resolve the issue, which may involve replacing faulty components or resetting certain settings.
Overall, the error code 0x0084 on the Epson XP-7100 printer indicates various potential causes related to Panel Encoder failure, Motor driver failure, Main board failure, or Tooth skip of the panel gears. Promptly seeking help from Epson support will ensure efficient troubleshooting and resolution of the error.
Printer Model | Epson XP-7100 |
Error Code | 0x0084 |
Display on | PRINTER |
Description and troubleshooting | PNL LOAD POSITION excess speed error. Panel Encoder failure. Motor driver failure. Main board failure. Tooth skip of the panel gears. |