Epson WF-M5690 Error 0x02BE
The Epson WF-M5690 is a highly efficient printer that offers exceptional performance. However, like any electronic device, it is not immune to errors. One common error code that may appear on the printer’s display is 0x02BE, accompanied by the message “EJ2 PID excess speed error.”
This error typically indicates a problem with the EJ2 motor encoder. The motor encoder is responsible for accurately measuring the position and speed of the printer’s components. There are several potential causes for this error, including contamination of the EJ2 encoder scale, skew or damage of the EJ2 encoder FFC (Flexible Flat Cable), failure of the EJ2 encoder sensor, failure of the EJ2 motor driver, or even a failure of the main board.
Fortunately, there are troubleshooting steps you can take to resolve this issue. Firstly, check for any visible contamination on the EJ2 encoder scale and clean it if necessary. Ensure that the EJ2 encoder FFC is properly aligned and undamaged. Additionally, inspect the EJ2 encoder sensor for any signs of malfunction or damage. If everything appears to be in order, restart the printer and see if the error persists.
If the error continues to occur, it is advisable to contact Epson customer support for further assistance. They can provide you with specific troubleshooting steps tailored to your printer model. In some cases, a replacement part or a technician’s inspection may be necessary to resolve the error.
Remember, it is essential to handle the printer with care and follow the manufacturer’s guidelines to prevent any potential damage or errors.
| Printer Model | Epson WF-M5690 |
| Error Code | 0x02BE |
| Display on | PRINTER |
| Description and troubleshooting | EJ2 PID excess speed error. Failed to read The EJ2 motor encoder. Contamination of The EJ2 encoder scale. Skew or damage of The EJ2 encoder FFC. Failure of The EJ2 encoder sensor Failure of The EJ2 motor driver. Failure of the main board. |
