Epson BX300F Error 0x11
The Epson BX300F printer error code 0x11 refers to an issue related to the Automatic Document Feeder (ADF). When this error occurs, the printer’s display will show the error code followed by the message “ASF PID excess load error.” This error indicates that there is a problem with the ADF’s components, particularly the encoder, motor, or overall mechanism overload. Another possible cause for this error is a cable or Flexible Flat Cable (FFC) disconnection.
To troubleshoot this error, you can try the following steps:
1. Restart the printer: Sometimes, a simple restart can fix the error. Turn off the printer, unplug it from the power source, and wait for a few minutes before turning it back on.
2. Check the ADF components: Inspect the ADF components for any visible obstructions or foreign objects that might be causing the excess load error. Clear any debris that you find.
3. Reconnect cables: Ensure that all cables and FFC connections related to the ADF are properly connected. Disconnect and reconnect them to ensure a secure connection.
4. Clean the encoder strip: The encoder strip, located behind the carriage, may accumulate dirt or ink residue over time. Gently clean the strip with a lint-free cloth or a cotton swab dipped in isopropyl alcohol.
5. Seek professional assistance: If the error persists after performing the above steps, it is recommended to contact Epson customer support or a qualified printer technician for further assistance.
By following these troubleshooting steps, you can address the Epson BX300F error code 0x11 and get your printer back to functioning normally.
| Printer Model | Epson BX300F |
| Error Code | 0x11 |
| Display on | PRINTER |
| Description and troubleshooting | ASF PID excess load error. Encoder failure. Motor failure. Mechanism overload. Cable or FFC disconnection. |
. When this error occurs, the printer’s display will…){kind=link}