Epson ET-16500 Error 0x12
The Epson ET-16500 printer is known for its high-quality scanning capabilities, but sometimes users may encounter an error code 0x12 on the scanner display. This error is related to the opposite side contact detection distance being exceeded, resulting in a malfunction. Several components can contribute to this issue, including the CIS module, scanner housing, main board, cables, and motor.
One possible cause of the error code 0x12 is a failure in the CIS module. The CIS module is responsible for converting light into an electrical signal during the scanning process. If this module malfunctions, it can disrupt the scanning function and trigger the error code.
Another potential culprit is a failure in the scanner housing. The housing houses the scanning components and ensures their proper alignment. If the housing gets damaged or misaligned, it can affect the scanning process and lead to error code 0x12.
A faulty main board can also be responsible for this error. The main board controls the overall operation of the scanner and communicates with other components. If the main board fails, it can cause various malfunctions, including the opposite side contact detection distance exceeded issue.
Additionally, a cable or FFC (Flexible Flat Cable) disconnection can also trigger the error code. These cables enable the transfer of data between different parts of the scanner. If they become disconnected or damaged, it can disrupt the scanning process and result in the error.
Lastly, a motor failure can also contribute to the error code 0x12. The motor is responsible for moving the scanning components, and if it fails, it can prevent the proper functioning of the scanner.
To troubleshoot this error, it is recommended to check all the connections and cables, ensuring they are properly attached. If the issue persists, it may require professional assistance to diagnose and fix the specific component failure.
| Printer Model | Epson ET-16500 |
| Error Code | 0x12 |
| Display on | SCANNER |
| Description and troubleshooting | Scanner/ADF opposite side contact detection distance exceeded error. CIS Module failure. Scanner Housing failure. Main board failure. Cable or FFC disconnection. Motor failure. Main board failure. |
