Epson ET-16500 Error OxDA
Content Title: Epson ET-16500 Error Code OxDA: Troubleshooting and Description of ASF LOAD POSITION Excess Load Error
Content:
If you are encountering the Epson ET-16500 Error Code OxDA with the message “ASF LOAD POSITION excess load error” displayed on your printer, it indicates an issue related to the Automatic Document Feeder (ADF) mechanism. This error code points towards potential causes such as encoder failure, motor failure, mechanism overload, cable or FFC disconnection.
The ASF LOAD POSITION excess load error usually occurs when there is an abnormal load detected on the ADF mechanism, preventing the printer from functioning properly. Here are some troubleshooting steps that you can follow to resolve this issue:
1. Check the ADF for any jammed paper or foreign objects that might be causing an obstruction. Gently remove any obstructions found and ensure that the ADF path is clear.
2. Verify the encoder strip, a clear plastic strip located behind the carriage assembly, is not dirty or damaged. Clean it with a lint-free cloth dampened with water if necessary.
3. Restart your printer by turning it off, unplugging it from the power source, waiting for a few minutes, and then plugging it back in.
4. Inspect the ADF motor and cable connections for any signs of looseness or damage. Ensure that the cables are securely attached to their respective connectors.
5. If the issue persists, it is recommended to contact Epson customer support for further assistance. Provide them with the specific error code (OxDA) and a detailed description of the problem.
Remember, it is important to handle the printer components with care and follow the manufacturer’s guidelines while troubleshooting the error. With the right steps, you can effectively troubleshoot and resolve the Epson ET-16500 Error Code OxDA and get your printer back to normal operation.
| Printer Model | Epson ET-16500 |
| Error Code | OxDA |
| Display on | PRINTER |
| Description and troubleshooting | ASF LOAD POSITION excess load error. Encoder failure. Motor failure. Mechanism overload. Cable or FFC disconnection. |
