Epson L3104-L3105 Error 0x003E
The Epson L3104-L3105 printer may display error code 0x003E, accompanied by the error message “ASF (1st) PID excess speed error.” This error indicates a problem with the printer’s encoder or its associated components. There are several potential causes for this error, including a contaminated encoder scale, a disconnected or broken FFC (flexible flat cable), an encoder sensor failure, motor driver failure, or even a main board failure.
One possible cause of this error is a contaminated encoder scale. The encoder scale is a small strip with lines that the printer uses to keep track of the carriage’s position. If this strip becomes dirty or contaminated, the printer may have difficulty reading it accurately, leading to the error. Cleaning the encoder scale with a lint-free cloth or some mild cleaning solution might resolve this issue.
Another potential cause is a disconnected or broken FFC. The FFC is a delicate cable that connects various components within the printer. If this cable becomes disconnected or damaged, it can disrupt the communication between the encoder and other printer parts, resulting in the error. Checking the cable connections and ensuring they are secure may fix the problem.
If the above steps do not resolve the issue, it is possible that there is a fault with the encoder sensor, motor driver, or even the main board. In such cases, it is recommended to contact Epson customer support or a professional technician for further assistance. They will be able to diagnose the exact issue and provide appropriate solutions to get the printer functioning properly again.
In conclusion, error code 0x003E on the Epson L3104-L3105 printer signifies a problem with the encoder or its associated components. Cleaning the encoder scale, checking the FFC connections, and seeking professional help if needed, are vital steps to troubleshoot and resolve this error.
| Printer Model | Epson L3104-L3105 |
| Error Code | 0x003E |
| Display on | PRINTER |
| Description and troubleshooting | ASF (1st) PID excess speed error. Encoder error. Contaminated encoder scale. Disconnected or broken FFC. Encoder sensor failure. Motor driver failure. Main board failure. |
 PID excess speed error.” This error indicates a problem with…){kind=link}