Epson L405 Error 0x02BD
The Epson L405 Error code 0x02BD, also known as the EJ2 PID excess load error, is a common issue that can occur with the printer. This error indicates that the EJ2 motor has stopped running in the middle of an operation. There are several reasons why this may have occurred.
One possible cause is obstacles such as jammed paper, which can prevent the motor from turning properly. Another potential reason is an overload of the paper feed mechanism, which puts too much strain on the motor. Disengaging or breakage of the gears can also result in the EJ2 motor stopping.
Another factor to consider is if the printer failed to read the EJ2 motor encoder. This could be due to issues such as a frayed or jumping timing belt or contamination of the EJ2 encoder scale.
Furthermore, problems with the EJ2 motor cable/encoder FFC, such as disconnection, breakage, skew, or damage, can lead to the motor not functioning correctly. However, it’s important to note that the motor may not be completely broken, just experiencing a failure.
In some cases, the EJ2 motor error could be attributed to a failure of the main board. If none of the aforementioned issues are the cause, it’s recommended to have the main board checked.
To troubleshoot this error, it’s advised to check for any obstructions or jams in the paper feed mechanism and remove them if necessary. Additionally, inspecting the gears for disengagement or breakage and replacing them if required is suggested. Cleaning the EJ2 encoder scale and ensuring the motor cable/encoder FFC is properly connected and undamaged can also help resolve the issue.
If the problem persists, it is recommended to contact Epson technical support for further assistance or to consult a professional technician for repairs.
| Printer Model | Epson L405 |
| Error Code | 0x02BD |
| Display on | PRINTER |
| Description and troubleshooting | EJ2 PID excess load error. The EJ2 motor stopped running in the middle of the operation. The EJ2 was stopped by Obstacles such as jammed paper Overload of the paper feed mechanism Disengaging or breakage of the gears. Failed to read The EJ2 motor encoder. The timing belt become frayed or jumping. Contamination of The EJ2 encoder scale. Disconnection, break, skew or damage of The EJ2 motor cable/encoder FFC. Failure of The EJ2 motor (not completely broken). Failure of the main board. |
