Epson L456 Error Code OxFC Part 2171

Epson L456 Error OxFC

Epson L456 Error OxFC

Epson L456 Error Code OxFC – Description and Troubleshooting

Are you encountering the Epson L456 Error Code OxFC on your printer’s display? This error indicates a PF (Paper Feed) Load Position Excess Judgment Error. It can be caused by various factors such as encoder failure, PF motor failure, PF mechanism overload, cable disconnection, or FFC (Flexible Flat Cable) disconnection.

To troubleshoot this issue, follow the steps below:

1. Check the Paper Feed Mechanism: Ensure there are no obstructions or pieces of torn paper inside the printer that could be causing the overload. Remove any foreign objects if found and make sure the paper path is clear.

2. Inspect Encoder and PF Motor: The encoder and PF motor could be the potential culprits behind this error code. Ensure they are working properly and not jammed. Clean the encoder strip if it is dirty or covered in ink, as it may hinder proper movement.

3. Verify Cable Connections: Cables and FFCs play a crucial role in the printer’s functionality. Double-check their connections to ensure they are firmly attached. If any cables are loose or disconnected, reattach them securely.

4. Restart the Printer: Sometimes, a simple restart can resolve various error codes. Turn off the printer, unplug the power cord, wait for a couple of minutes, and then plug it back in. Power it on and see if the error is resolved.

5. Consult Epson Customer Support: If you have followed the troubleshooting steps above and the error code persists, it is advisable to contact Epson customer support for further assistance. They have trained technicians who can provide specialized guidance and help resolve the issue.

Remember, these troubleshooting steps should be performed carefully to avoid any damage to the printer.

Printer Model Epson L456
Error Code OxFC
Display on PRINTER
Description and troubleshooting PF LOAD POSITION excess judgment error. Encoder failure. PF motor failure. PF Mechanism overload. Cable or FFC disconnection.

Add Comment