Epson L495 Error 0x82E2
Epson L495 Error Code 0x82E2 Display on PRINTER: Description and Troubleshooting- Excessive Light Error
If your Epson L495 printer is displaying Error Code 0x82E2, it indicates an issue with excessive light. More specifically, the error suggests that the light emitted from the full jig I/C is too intense. In such cases, it is essential to follow the correct troubleshooting steps to resolve this error.
To troubleshoot the excessive light error, here are some recommended steps:
1. Power off your printer: Turn off your Epson L495 printer and unplug it from the power source.
2. Wait for a few minutes: Allow the printer to cool down and reset by leaving it unplugged for about 5-10 minutes.
3. Check the jig I/C: Carefully inspect the full jig I/C (Integrated Circuit) located within your printer. Ensure there are no visible damages or loose connections.
4. Adjust printer settings: Access your printer settings through the control panel or printer software on your computer. Reduce the light settings by selecting a lower intensity or brightness level.
5. Update printer firmware: Check if there are any available firmware updates for your Epson L495 printer. If updates are available, install them as they might include fixes for known issues.
6. Contact Epson Support: If the issue persists after following the above steps, it is recommended to contact Epson customer support for further assistance. They will be able to provide specific guidance or arrange repairs if needed.
By following these troubleshooting steps, you can effectively resolve the Excessive Light Error (Epson L495 Error Code 0x82E2) on your printer. Remember to always refer to the manufacturer’s guidelines and seek professional help if necessary.
| Printer Model | Epson L495 |
| Error Code | 0x82E2 |
| Display on | PRINTER |
| Description and troubleshooting | Excessive Light error. Light from full jig l/C is too much. |
