Epson M200 Error OxFA
The Epson M200 printer can encounter the error code OxFA, which is displayed on the printer’s screen. This error indicates a problem with the PF (Paper Feed) load position, and it can be caused by various factors such as encoder failure, PF motor failure, PF mechanism overload, cable or FFC disconnection, or tooth skip/improper tension of the timing belt.
To troubleshoot this error, there are a few steps you can take. Firstly, check if there is any paper jammed in the printer. Clear any paper jams carefully, making sure not to damage any components. Next, ensure that the paper is correctly loaded into the paper tray. Improperly loaded paper can cause excess load on the PF mechanism, leading to this error.
If the error persists, turn off the printer and disconnect the power cord. Open the printer cover and check for any loose cables or FFC (Flexible Flat Cable) connections. Reconnect any loose cables securely.
In some cases, this error may be caused by an issue with the timing belt. Inspect the timing belt for any signs of damage or misalignment. If necessary, adjust the tension of the timing belt or replace it if it is worn out.
If all the above steps fail to resolve the error, it is recommended to contact Epson customer support for further assistance. They will be able to provide more specific troubleshooting steps or advise on the next course of action to resolve the PF load position excess load error on your Epson M200 printer.
Printer Model | Epson M200 |
Error Code | OxFA |
Display on | PRINTER |
Description and troubleshooting | PF LOAD POSITION excess load error. Encoder failure. PF motor failure. PF Mechanism overload. Cable or FFC disconnection. Tooth skip or improper tension of the timing belt. |