Epson M2120-M2128-M2129 Error 0x0047
The Epson M2120-M2128-M2129 printers sometimes encounter the error code 0x0047, which is displayed on the printer. This error indicates an issue with the ASF (1st) load position, specifically, an excess load error. There are several possible causes for this error, including a paper jam, mechanism overload, broken gear, encoder error, contaminated encoder scale, encoder sensor failure, motor failure, or main board failure.
One of the common reasons for the error code 0x0047 is a paper jam. If there is any paper stuck inside the printer, it can lead to the ASF motor stopping in the middle of its operation, triggering the error. Clearing the paper jam and ensuring there are no obstructions in the paper path is a good first step to troubleshoot this error.
Mechanism overload can also cause the ASF motor to stop running, resulting in the error code 0x0047. Overworking the printer by continuously feeding it with too much paper can lead to this overload. It is essential to make sure that you are not exceeding the printer’s recommended maximum paper capacity.
Another potential cause is a broken gear within the printer. A damaged gear can hinder the proper functioning of the ASF motor, causing the error to occur. In such cases, identifying and replacing the broken gear is necessary to resolve the issue.
An encoder error or a contaminated encoder scale may also contribute to the error code 0x0047. The encoder scale is responsible for providing accurate positioning information to the printer. If it is dirty or damaged, the ASF motor may encounter difficulties in its operation. Cleaning or replacing the encoder scale might be required in these situations.
In some instances, the encoder sensor or the motor itself may undergo failure, leading to the error code. Diagnosing and replacing the faulty component can help rectify the problem.
In rare cases, if none of the above troubleshooting steps work, a failure in the printer’s main board might be the cause of the error. Professional assistance or contacting Epson support may be necessary to resolve this issue.
Overall, the error code 0x0047 on the Epson M2120-M2128-M2129 printers signifies an issue with the ASF (1st) load position. Conducting thorough troubleshooting steps and seeking professional help, if needed, can help address the problem effectively.
| Printer Model | Epson M2120-M2128-M2129 |
| Error Code | 0x0047 |
| Display on | PRINTER |
| Description and troubleshooting | ASF (1st) load position excess load error. The ASF (1st) motor stopped running in the middle of the operation. Paper jam. Mechanism overload. Broken gear. Encoder error. Contaminated encoder scale. Encoder sensor failure. Motor failure. Main board failure. |
 load…){kind=link}