Epson M2120-M2128-M2129 Error 0x0051
The Epson M2120-M2128-M2129 printer may display Error code 0x0051, indicating a problem with the ASF (2nd) PID excess load. This error occurs when the ASF (2nd) motor stops running during operation. It is often associated with issues such as paper jams, mechanism overload, broken gears, encoder errors, contaminated encoder scales, disconnected or broken FFC, encoder sensor failure, motor failure, or even main board failure.
One common cause for this error is a paper jam. If you encounter this error, check the printer for any paper stuck in the paper path and carefully remove it. Ensure there are no torn or crumpled paper bits left behind that could cause further issues.
Another possibility is a mechanism overload. This occurs when the printer’s components are overloaded with excessive force or weight. Check for any foreign objects or obstructions within the printer that could be causing this overload and remove them accordingly.
A broken gear can also cause the printer to display this error. In this case, you may need to inspect the printer’s internal components, specifically the gears, for any signs of damage or breakage. If a gear is found to be broken, it will need to be replaced to resolve the error.
An encoder error or a contaminated encoder scale can also lead to this error code. The encoder scale is responsible for providing accurate position information to the printer. If it is contaminated or damaged, it can cause the motor to stop running. Cleaning the encoder scale or replacing it if necessary can help resolve this error.
If the above troubleshooting steps do not resolve the issue, it is recommended to contact Epson customer support or a certified technician for further assistance as it could be a more complex problem such as a disconnected or broken FFC, encoder sensor failure, motor failure, or main board failure.
| Printer Model | Epson M2120-M2128-M2129 |
| Error Code | 0x0051 |
| Display on | PRINTER |
| Description and troubleshooting | ASF (2nd) PID excess load error. The ASF (2nd) motor stopped running in the middle of the operation. Paper jam. Mechanism overload. Broken gear. Encoder error. Contaminated encoder scale. Disconnected or broken FFC. Encoder sensor failure. Motor failure. Main board failure. |
 PID excess load. This error occurs when the ASF (2nd)…){kind=link}