Epson ME-Office-560 Error OxCD
Content Marketing – Epson ME-Office-560 Error Code OxCD Display on PRINTER: Description and Troubleshooting
Are you encountering an Error Code OxCD displayed on your Epson ME-Office-560 printer? This error message typically indicates ink device error, ink cartridge failure, holder board assembly failure (CSIC or contact failure), main board failure, or cable or FFC disconnection. We will walk you through a troubleshooting guide to help you resolve this issue.
Firstly, make sure that the ink cartridges are properly installed. Check if they are seated securely and that they are compatible with your Epson ME-Office-560 printer model. If any ink cartridge is empty or low on ink, consider replacing it immediately.
Secondly, inspect the holder board assembly. Ensure that the CSIC (Cartridge Chip or Ink Supply Center) is clean and free of dust or debris. If necessary, gently clean the contacts using a soft, lint-free cloth.
If the issue persists, it may indicate a main board failure. In this case, we recommend contacting Epson customer support or an authorized service center for further assistance. The main board is a critical component, and it is best to involve professionals in handling this type of repair.
Lastly, inspect the cables and FFC (Flexible Flat Cable) connections. Turn off the printer, unplug the power cable, and carefully check for any loose or disconnected cables. If any cables are loose, reseat them firmly and ensure they are securely connected.
By following these troubleshooting steps, you can potentially resolve the Epson ME-Office-560 OxCD Error Code and get your printer back to normal functioning. However, if the issue persists or if you are unsure about performing any steps mentioned, we recommend reaching out to Epson customer support for further guidance.
| Printer Model | Epson ME-Office-560 |
| Error Code | OxCD |
| Display on | PRINTER |
| Description and troubleshooting | Ink device error. Ink cartridge failure. Holder board assy failure (CSIC or contact failure). Main board failure. Cable or FFC disconnection. |
