Epson ME400-ME401 Error OxCA
The Epson ME400-ME401 printer may sometimes encounter an error code OxCA, which is displayed on the printer. This error code usually indicates an ink device error, ink cartridge failure, holder board assembly failure (CSIC or contact failure), main board failure, or cable or FFC disconnection.
One common cause of this error is an ink device error, which may stem from a faulty ink cartridge or an issue with the printer’s ink system. In this case, it is recommended to check and replace the ink cartridge if necessary. Additionally, ensuring that the ink system is properly cleaned and maintained can help resolve this error.
In the event of an ink cartridge failure, the printer may not recognize the installed ink cartridges or encounter difficulties in reading the ink levels. To troubleshoot this problem, trying a different set of ink cartridges or reinstalling them can be helpful.
If the error is related to the holder board assembly, it may indicate a failure in the CSIC (cartridge chip) or a contact failure. In such instances, checking the connections between the cartridge and the holder board and ensuring they are securely attached can rectify the problem.
A main board failure is another possible cause of the OxCA error code. In this case, seeking professional assistance or contacting Epson customer support is recommended to diagnose and resolve the issue.
Lastly, the error code may also arise from a cable or FFC (flat flexible cable) disconnection. Verifying the connections between the cables and FFCs, and making sure they are properly attached, should be considered when troubleshooting this error.
By following the described troubleshooting steps, users can attempt to resolve the Epson ME400-ME401 printer’s OxCA error code and resume their printing tasks efficiently.
| Printer Model | Epson ME400-ME401 |
| Error Code | OxCA |
| Display on | PRINTER |
| Description and troubleshooting | Ink device error. Ink cartridge failure. Holder board assy failure (CSIC or contact failure). Main board failure. Cable or FFC disconnection. |
