Epson NX410-NX415-NX419 Error 0xB6
The Epson NX410-NX415-NX419 printer may sometimes display the error code 0xB6, indicating various ink-related issues. This error typically occurs due to problems with the ink device, ink cartridge failure, holder board assembly failure (CSIC or contact failure), main board failure, or cable and FFC disconnections.
One of the possible causes for this error is an ink device error. This may occur if the ink device is not functioning properly or is damaged. In such cases, it is recommended to check the ink device and replace it if necessary.
Another possible reason for the error code 0xB6 is an ink cartridge failure. If the ink cartridge is not inserted correctly or is incompatible, this error may appear. Make sure to verify the cartridge’s compatibility and ensure it is seated properly in its designated slot. If needed, try replacing the ink cartridge with a new one.
The error code 0xB6 can also be caused by a failure in the holder board assembly, specifically the CSIC (Contact Sensor Image Restoration). This board is responsible for communicating with the ink cartridges. If there is a failure in this assembly, it may result in ink-related errors. In such cases, it is advisable to contact Epson support for further assistance.
Additionally, a main board failure or a cable/FFC (Flexible Flat Cable) disconnection can also trigger the error code 0xB6. In such situations, it is recommended to check the connections and wiring between the main board and other components. Ensure they are securely connected, and if necessary, seek professional help for repair.
To summarize, the error code 0xB6 on the Epson NX410-NX415-NX419 printer indicates ink device errors, cartridge failures, holder board assembly failures, main board failures, or cable/FFC disconnections. It is essential to troubleshoot and address these issues accordingly to restore normal printer functionality.
| Printer Model | Epson NX410-NX415-NX419 |
| Error Code | 0xB6 |
| Display on | PRINTER |
| Description and troubleshooting | Ink device error. Ink cartridge failure. Holder board assy failure (CSIC or contact failure). Main board failure. Cable or FFC disconnection. |
