Epson PM-A840 Error Code OxAO Part 75226

Epson PM-A840 Error OxAO

The Epson PM-A840 printer is a highly reliable and efficient printing device. However, there may be instances when users encounter an error code OxAO displayed on the printer, indicating a waste ink overflow issue. This error is a common problem faced by printer users and can be easily resolved with a few troubleshooting steps.

When the waste ink overflow occurs, it signifies that the ink pads inside the printer have reached their maximum capacity and need to be replaced or cleaned. These ink pads are responsible for absorbing excess ink during the printing process, ensuring the smooth functioning of the printer.

To troubleshoot this error, follow these steps:

1. Turn off the printer and unplug it from the power source. This step is necessary to prevent any electrical mishaps.

2. Open the printer cover carefully and locate the ink pad assembly. It is usually located on the right side of the printer.

3. Use a pair of gloves to protect your hands from ink stains. Remove the ink pads from their position and rinse them thoroughly under warm water. Make sure to remove any excess ink and dirt.

4. Allow the ink pads to dry completely before reinserting them back into the printer. It is recommended to let them air dry for a few hours.

5. Once the ink pads are dry, carefully place them back into their designated position inside the printer.

6. Close the printer cover and plug it back into the power source.

7. Turn on the printer and check if the error code OxAO has been resolved.

By following these troubleshooting steps, users can easily fix the waste ink overflow error on the Epson PM-A840 printer and resume their printing tasks without any inconvenience.