Epson PM245 Error OxOA
The Epson PM245 printer may sometimes encounter an error code OxOA, which is displayed on the printer’s screen. This error code indicates various problems related to the CR (Carriage Return) mechanism. The following are the possible issues associated with this error:
1. CR LOAD POSITION excess load error: This error occurs when the printer’s carriage, which holds the ink cartridges, is experiencing excessive load. It may happen due to obstructions or blockages within the printer, causing the carriage to move abnormally.
2. CR encoder failure: The CR encoder is responsible for determining the precise position of the carriage. If this encoder malfunctions, the printer will display the OxOA error code. It can be caused by a damaged or faulty encoder sensor.
3. CR motor failure: The CR motor drives the carriage movement and any malfunction in this motor can result in the OxOA error. This issue is typically caused by a faulty motor or connection failure.
4. Carriage overload: When the carriage is overloaded with excessive weight or excessive pressure is exerted on it, the printer will display this error code. It can happen due to mishandling or improper installation of ink cartridges.
5. Tooth skip or improper tension of the timing belt: The timing belt is responsible for the smooth movement of the carriage. If there is a tooth skip or the tension of the belt is incorrect, it can result in the OxOA error.
6. Cable or FFC disconnection: The printer’s cables or Flat Flexible Cables (FFC) connect various components of the printer. If any of these cables are disconnected or damaged, it can trigger the OxOA error.
To troubleshoot these issues, one can try the following steps:
1. Power off the printer and unplug it from the power source.
2. Check for any obstructions or blockages and remove them if found.
3. Ensure that all cables and FFCs are securely connected.
4. If the error persists, it is recommended to contact Epson customer support or a certified technician for further assistance.
| Printer Model | Epson PM245 |
| Error Code | OxOA |
| Display on | PRINTER |
| Description and troubleshooting | CR LOAD POSITION excess load error. CR encoder failure. CR motor failure. Carriage overload. Tooth skip or improper tension of the timing belt. Cable or FFC disconnection. |
