Epson PX-5V Error OxCC
If you are an Epson PX-5V printer user, encountering an OxCB error code on the printer display can be quite frustrating. This error code typically indicates an ink device error, ink cartridge failure, holder board assembly failure (CSIC or contact failure), main board failure, or cable/FFC disconnection. In order to resolve this issue and get your printer up and running again, you can try following some simple troubleshooting steps.
Firstly, ensure that you have installed the ink cartridges correctly. Take them out and reinsert them firmly into their respective slots. This might resolve any ink cartridge related issues causing the error.
If the error persists, check the holder board assembly for any loose connections or faults. The CSIC (Contact Image Sensor Chip) or the contacts might be dirty or damaged. Gently clean the contacts with a lint-free cloth and try again.
In case the error still appears, it could indicate a failure in the main board of the printer. Unfortunately, fixing this issue might require professional assistance or even replacing the main board altogether.
Lastly, check if any cables or flexible flat cables (FFC) are disconnected or damaged. Ensure all connections are secure and intact.
If none of the above steps resolve the issue, it is recommended to reach out to Epson customer support or a qualified printer technician for further assistance. They can provide expert guidance tailored to your specific printer model and help you get your printer back in working condition.
Remember, troubleshooting steps may vary depending on the printer model and the specific error code displayed. Therefore, referring to the printer manual or contacting customer support will provide accurate and detailed troubleshooting information.
| Printer Model | Epson PX-5V |
| Error Code | OxCC |
| Display on | PRINTER |
| Description and troubleshooting | Ink device error. Ink cartridge failure. Holder board assy failure (CSIC or contact failure). Main board failure. Cable or FFC disconnection. |
