Epson PX-M5080F Error 0x82E3
Epson PX-M5080F Error code 0x82E3 is displayed on your printer, indicating an “Insufficient Light” error. This error occurs due to various reasons, such as insufficient electric voltage for the PIS sensor, a break in the Flexible Flat Cable (FFC), deterioration of the PIS sensor, or insufficient reflected light from the l/C (Liquid Crystal) component.
To troubleshoot this error, there are a few steps you can take. Firstly, ensure that the printer is properly connected to a stable power supply. Sometimes, fluctuations in the electric voltage can cause this error. If the issue persists, check the FFC, a thin ribbon-like cable that connects components within the printer. Look for any breaks or damages to the FFC and replace it if necessary.
If the error continues, it may indicate deterioration of the PIS sensor. In this case, it is recommended to contact Epson customer support or a qualified technician for further assistance. They can provide guidance on repairing or replacing the sensor if required.
Lastly, insufficient reflected light from the l/C component can also trigger this error. Verify that the l/C is clean and free from any dirt or obstructions. If needed, gently clean it using a lint-free cloth or follow the manufacturer’s instructions for cleaning.
By following these troubleshooting steps, you can resolve the Epson PX-M5080F error code 0x82E3 related to the “Insufficient Light” error. In case the error persists or you are unsure about performing the steps yourself, it is advisable to seek professional help to avoid any further complications.
| Printer Model | Epson PX-M5080F |
| Error Code | 0x82E3 |
| Display on | PRINTER |
| Description and troubleshooting | Insufficient Light error. Electric voltage for the PIS sensor is insufficient. Break of the FFC. The PIS sensor has deteriorated. Reflected light from the l/C is insufficient. |
