Epson R3000 Error 0xB4
The Epson R3000 Error code 0xB4 may be displayed on your printer, indicating an ink device error. This error can be triggered by various factors, including ink cartridge failure, holder board assembly failure (such as CSIC or contact failure), main board failure, or cable or FFC disconnection.
When experiencing this error, it is essential to follow troubleshooting steps to resolve the issue. Firstly, ensure that the ink cartridges are properly installed and not empty. Try removing and reinserting them to ensure a secure connection. If the error persists, try replacing the ink cartridges with new ones to rule out any cartridge-related issues.
If the ink cartridges are not the cause, it is possible that the holder board assembly is at fault. This can occur due to a failure in the CSIC (Cartridge Self Identification Circuit) or a contact failure. In such cases, it is recommended to contact Epson customer support for further assistance or consider seeking professional repair services.
In some instances, the main board of the printer might be the culprit. A main board failure can prevent proper communication between the printer and ink cartridges. To rectify this, you can try restarting the printer or performing a factory reset. If the error persists, professional assistance may be required to replace the main board.
Lastly, it is also advisable to check for cable or FFC disconnection. Ensure that all connections are secure and properly plugged in. If any cables appear loose or disconnected, try reconnecting them firmly.
In conclusion, the Epson R3000 Error code 0xB4 indicates an issue with the ink device and can be caused by factors such as ink cartridge failure, holder board assembly failure, main board failure, or cable disconnection. By following the above troubleshooting steps, you can identify and resolve the problem to resume smooth printing operations.
| Printer Model | Epson R3000 |
| Error Code | 0xB4 |
| Display on | PRINTER |
| Description and troubleshooting | Ink device error. Ink cartridge failure. Holder board assy failure (CSIC or contact failure). Main board failure. Cable or FFC disconnection. |
