Epson R330 Error 0xD2
The Epson R330 printer might encounter an error code 0xD2 which is displayed as “CR LOAD POSITION driving time error”. This error could be related to the failure of the CR encoder, tooth skip or improper tension of the timing belt, or even carriage overload. To resolve this issue and get your printer back in working condition, follow the troubleshooting steps provided below.
Firstly, check if there is any obstruction or foreign object that might be hindering the movement of the cartridge cradle. Remove any such obstacles carefully. Next, make sure that the timing belt is properly tensioned and aligned. You can refer to the printer’s manual for guidance on adjusting the timing belt.
If the issue persists, inspect the CR encoder. It is a small wheel-like component located on the left side of the carriage. Check for any damage, loose connections, or misalignment. Clean the encoder carefully with a lint-free cloth if it appears dirty. If necessary, consider replacing the encoder.
Additionally, check if the carriage is overloaded with excessive weight. If so, remove any unnecessary items or documents. It is essential to keep the carriage’s load within the stated capacity.
After performing these troubleshooting steps, try restarting the printer. This should help in resolving the error code 0xD2. However, if the problem persists, it is recommended to contact Epson’s customer support for further assistance.
Remember, addressing this error promptly will ensure the uninterrupted functioning of your Epson R330 printer and prevent any potential damage to its components.
| Printer Model | Epson R330 |
| Error Code | 0xD2 |
| Display on | PRINTER |
| Description and troubleshooting | CR LOAD POSITION driving time error. CR encoder failure. Tooth skip or improper tension of the timing belt. Carriage overload. |
