Epson RX560-RX565 Error OxBF
If you own an Epson RX560-RX565 printer and have encountered the OxBF error code with the ink device error message displayed on the printer, it is important to understand the possible causes and potential troubleshooting steps to resolve the issue.
The OxBF error code typically indicates an issue with the ink cartridge or the holder board assembly. It could be due to a failure in the CSIC (Contact Image Sensor Cartridge) or contact points within the holder board assembly. In some cases, the error may also be caused by a failure in the main board of the printer or a disconnection in the cable or Flexible Flat Cable (FFC).
To troubleshoot the OxBF error code, follow these steps:
1. Remove the ink cartridge and reinsert it firmly. Make sure it is properly seated in the holder.
2. Clean the contact points on the ink cartridge and holder board assembly using a soft, lint-free cloth. Ensure there is no blockage or debris causing poor connections.
3. Restart the printer and check if the error still persists. If it does, try using a different ink cartridge to rule out any cartridge-specific issues.
4. If the issue continues, it could indicate a failure in the main board or a cable/FFC disconnection. In such cases, it is recommended to contact Epson support for further assistance. They can guide you through advanced troubleshooting steps or schedule a repair service if needed.
Remember to always follow the manufacturer’s instructions and precautions while troubleshooting any printer issues.
| Printer Model | Epson RX560-RX565 |
| Error Code | OxBF |
| Display on | PRINTER |
| Description and troubleshooting | Ink device error. Ink cartridge failure. Holder board assy failure (CSIC or contact failure). Main board failure. Cable or FFC disconnection. |
