Epson SX210-SX215-SX219 Error 0xB6
Error code 0xB6 is a common issue that occurs on Epson SX210, SX215, and SX219 printers. This error code is associated with ink device errors, ink cartridge failures, holder board assembly failures, main board failures, as well as cable or FFC (Flexible Flat Cable) disconnections.
When the printer encounters this error, it signifies that there is an issue with the ink device. It can be caused by various factors such as the ink cartridge not being recognized, a failure in the holder board assembly (which includes the Cartridge Chip Identity Sensor or CSIC), malfunctioning of the main board, or a disconnection in the cable or FFC.
To troubleshoot this error, there are a few steps you can try. Firstly, ensure that the ink cartridges are properly installed and correctly recognized by the printer. Try removing and reinserting the cartridges to establish a proper connection.
If the issue persists, check for any visible damage or loose connections on the holder board assembly. Gently clean the contact points and try reseating the assembly.
If the previous steps do not resolve the error, it might indicate a failure in the main board. In this case, professional assistance or contacting Epson support might be necessary to diagnose and repair the issue.
Moreover, it is essential to inspect the cable or FFC connections for any signs of disconnection or physical damage. Reconnecting or replacing the cables, if needed, could potentially rectify the error.
In conclusion, error code 0xB6 on the Epson SX210, SX215, and SX219 printers indicates ink device errors, and troubleshooting involves checking ink cartridge recognition, examining the holder board assembly, inspecting the main board, and ensuring cable/FFC connections are secure.
Printer Model | Epson SX210-SX215-SX219 |
Error Code | 0xB6 |
Display on | PRINTER |
Description and troubleshooting | Ink device error. Ink cartridge failure. Holder board assy failure (CSIC or contact failure). Main board failure. Cable or FFC disconnection. |