Epson SX410-SX415-SX419 Error 0x89
The Epson SX410-SX415-SX419 printer may encounter an error code 0x89 which is displayed as “Insufficient Light error”. This error can occur due to various reasons such as PIS failure, Fault Detection Plate failure, Main board failure, or Ink cartridge failure. In order to resolve this issue, some troubleshooting steps can be followed.
Firstly, ensure that the printer is turned off and unplugged from the power source. Then, check the ink cartridges and make sure they are properly installed. If any of the cartridges are empty or low on ink, replace them with new ones.
Next, clean the printer’s head by accessing the printer settings through the control panel or the printer software. Look for the option to clean the print head and follow the instructions provided.
If the error persists, try resetting the printer to its default settings. This can be done by navigating to the printer’s settings menu and selecting the option to reset all settings. Confirm the action and wait for the printer to restart.
If none of the above steps resolve the error code 0x89, it is recommended to contact Epson customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a technician to inspect the printer.
It is important to note that error codes can vary depending on the printer model, so it is always advisable to refer to the printer’s user manual or Epson’s official support website for accurate troubleshooting instructions.
| Printer Model | Epson SX410-SX415-SX419 |
| Error Code | 0x89 |
| Display on | PRINTER |
| Description and troubleshooting | Insufficient Light error. PIS failure. Fault Detection Plate failure. Main board failure. Ink cartridge failure. |
