Epson SX535WD Error OxCE
If you have encountered the Epson SX535WD error code OxCE and it is being displayed on your printer, it is likely indicating an ink device error. This error can be triggered by various issues, including ink cartridge failure, holder board assembly failure (also known as CSIC or contact failure), main board failure, or cable or FFC (flat flexible cable) disconnection.
One possible cause for this error is an ink cartridge failure. This occurs when the ink cartridge installed in the printer is not recognized or is not compatible. In such cases, make sure you have installed the correct ink cartridge for your specific printer model and that it is properly seated in the cartridge holder. You may also want to try removing and reinstalling the cartridge to ensure a secure connection.
Another potential culprit is the holder board assembly, which houses the Contact Image Sensor Chip (CSIC). If there is a failure with the CSIC or if there is poor contact, it can result in the OxCE error. To troubleshoot this, gently clean the gold electrical contacts on both the CSIC and the printer using a lint-free cloth. Ensure that there is no debris or ink residue present. If the error persists, it may be necessary to replace the holder board assembly.
Additionally, a main board failure or a disconnection in the cable or FFC can also trigger this error code. In such cases, professional assistance might be required to diagnose and resolve the issue.
It is important to note that before attempting any troubleshooting steps, it is advisable to consult the printer’s user manual or contact Epson customer support for specific instructions and guidance tailored to your printer model.
| Printer Model | Epson SX535WD |
| Error Code | OxCE |
| Display on | PRINTER |
| Description and troubleshooting | Ink device error. Ink cartridge failure. Holder board assy failure (CSIC or contact failure). Main board failure. Cable or FFC disconnection. |
