Epson WF-4730-4735 Error 0x86C4
Epson WF-4730-4735 Error code 0x86C4, displaying on the printer, indicates an ink cartridge replacement timing contact detection error. This error occurs when the cartridge is not securely installed, causing it to come in contact with the housing.
Troubleshooting this issue is relatively straightforward. Firstly, ensure that the printer is turned off and unplugged from the power source. Then, carefully remove the cartridge causing the error message. Inspect the cartridge for any signs of damage or misalignment. If detected, it is advisable to replace the cartridge with a new one.
Before installing the new cartridge, thoroughly clean the contact points on the cartridge and inside the printer. Any residue or dirt on these surfaces can interfere with proper communication and cause errors. Additionally, make sure that there are no foreign objects obstructing the cartridge’s correct placement within the printer.
Once the cleaning process is completed, securely reinstall the new cartridge. Ensure that it is inserted correctly and firmly into the designated slot. Avoid using excessive force during installation to prevent any damage.
After reinstalling the cartridge, plug in the printer, and power it on. Check if the error message still persists. If the error code is no longer displayed, you have successfully resolved the issue. However, if the error message continues to appear, it is recommended to contact Epson customer support for further assistance.
By following these troubleshooting steps, you can overcome the ink cartridge replacement timing contact detection error (error code 0x86C4) on your Epson WF-4730-4735 printer and resume seamless printing functionality.
| Printer Model | Epson WF-4730-4735 |
| Error Code | 0x86C4 |
| Display on | PRINTER |
| Description and troubleshooting | Ink cartridge replacement timing contact detection error. Cartridge comes in contact with the housing because it is not securely installed. |
