Epson WorkForce-600 Error OxB3
When using the Epson WorkForce-600 printer, you may encounter an error code OxB3 displayed on the printer. This error code indicates an issue with the ink device, specifically related to ink cartridge failure, holder board assembly failure, main board failure, cable disconnection, or FFC disconnection.
One possible cause of the OxB3 error code is an ink cartridge failure. This means that the printer is unable to recognize or communicate with the ink cartridges. To troubleshoot this issue, you can try removing and reinstalling the ink cartridges, ensuring they are properly seated in their slots. Additionally, make sure you are using genuine Epson ink cartridges.
Another possible cause of the error code is a failure with the holder board assembly, such as a CSIC (Chipless Sensor Interface Circuit) or contact failure. In this case, you may need to contact Epson support for assistance. They can provide guidance on checking and replacing the assembly if necessary.
A main board failure can also trigger the OxB3 error code. This refers to a malfunction in the printer’s main circuit board. Unfortunately, repairing or replacing the main board is a more complex task that should be done by a qualified technician.
Lastly, the error code may be caused by a cable or FFC (Flat Flexible Cable) disconnection. If you suspect this is the case, you can try checking and reconnecting any loose cables or FFCs inside the printer. Take precautions and ensure the printer is turned off and unplugged before attempting any internal repairs.
In conclusion, the Epson WorkForce-600 error code OxB3 indicates various potential issues related to ink device error, ink cartridge failure, holder board assembly failure, main board failure, or cable/FFC disconnection. By following the troubleshooting steps mentioned above or seeking assistance from Epson support, you can resolve these issues and get your printer up and running again.
| Printer Model | Epson WorkForce-600 |
| Error Code | OxB3 |
| Display on | PRINTER |
| Description and troubleshooting | Ink device error. Ink cartridge failure. Holder board assy failure (CSIC or contact failure). Main board failure. Cable or FFC disconnection. |
