Epson WorkForce-845 Error 0x04
Epson Workforce-845 printers may sometimes display the error code 0x04, along with various descriptions such as CR PID lock error, CR encoder failure, CR motor failure, CR Mechanism overload, detached parts, cable or FFC disconnection, motor driver failure, or main board failure.
When facing this error, it is important to troubleshoot the issue to resume normal printing function. Here are some troubleshooting steps you can follow:
1. Power cycle the printer: Turn off the printer, unplug the power cord from the outlet, and wait for a few minutes. Plug it back in, and turn the printer on.
2. Check for any visible detached parts: Carefully inspect the printer for any loose or detached components. If you find any, gently reattach them back into their respective places.
3. Ensure cable and FFC connections: Verify that all cables and FFC (Flat Flexible Cable) connections are securely plugged in. If any are loose or disconnected, reconnect them properly.
4. Reset the printer: Perform a factory reset on the printer by accessing the settings menu. This will restore default settings and might resolve the error.
5. Update printer firmware: Check Epson’s official website for any available firmware updates for your printer model. Download and install the latest firmware to address any software-related issues.
6. Contact Epson support: If the error persists after following the aforementioned steps, it is recommended to reach out to Epson’s customer support for further assistance. They have trained professionals who can guide you through additional troubleshooting or provide repair options if needed.
Remember, troubleshooting steps may vary, and it is always advisable to consult the printer’s user manual or contact the manufacturer for specific instructions related to Error code 0x04.
| Printer Model | Epson WorkForce-845 |
| Error Code | 0x04 |
| Display on | PRINTER |
| Description and troubleshooting | CR PID lock error. CR encoder failure. CR motor failure. CR Mechanism overload. Some part may be detached. Cable or FFC disconnection. Motor driver failure. Main board failure. |
