Epson WP-4511 Error OxF1
The Epson WP-4511 is a highly efficient printer, but like any other technology, it may encounter errors from time to time. One such error is the OxF1 error code displayed on the printer. This error indicates various issues that may occur, including a PF PID excess load error, encoder failure, PF motor failure, PF mechanism overload, cable or FFC disconnection, tooth skip or improper tension of the timing belt, motor driver failure, or main board failure.
The PF PID excess load error occurs when the paper feed (PF) mechanism is overloaded. This could happen if there is a paper jam or the paper is not loaded correctly. Similarly, the encoder failure occurs when the sensor that reads the position of the PF mechanism fails to function properly.
If you experience a PF motor failure, it means that the motor responsible for moving the paper feed mechanism has malfunctioned. In the case of PF mechanism overload, the PF unit may be obstructed or jammed, preventing the proper movement of paper.
Cable or FFC disconnection refers to a loose or disconnected cable or flexible flat cable, which may cause communication issues between the printer components. Tooth skip or improper tension of the timing belt could occur due to wear and tear or incorrect installation, causing misalignment or malfunction of the paper feed mechanism.
Motor driver failure and main board failure both refer to internal hardware issues within the printer, which may require professional repair or replacement.
If you encounter the OxF1 error code on your Epson WP-4511 printer, it is recommended to first check for any paper jams or improperly loaded paper. You can also try reconnecting any loose cables or FFCs. If the issue persists, it is advisable to contact Epson customer support for further assistance.
| Printer Model | Epson WP-4511 |
| Error Code | OxF1 |
| Display on | PRINTER |
| Description and troubleshooting | PF PID excess load error. Encoder failure. PF motor failure. PF Mechanism overload. Cable or FFC disconnection. Tooth skip or improper tension of the timing belt. Cable or FFC disconnection. Motor driver failure. Main board failure. |
