Epson XP-800-801-802 Error 0x95
The Epson XP-800-801-802 Error code 0x95 occurs when the printer’s display shows an error related to the PE detector emitting the wrong amount of light. This error can also indicate problems with the PE Sensor or the Main Board.
The PE detector is responsible for detecting the paper edge during printing. If it emits an incorrect amount of light, it can lead to inaccurate paper feeding, resulting in printing errors. The PE Sensor, on the other hand, detects the position of the paper and ensures smooth paper feeding. When either of these components fails, it can cause the error code 0x95 to appear.
To troubleshoot this error, you can try the following steps:
1. Power off the printer: Turn off the printer and unplug it from the power source. Leave it unplugged for a few minutes to allow any residual charge to dissipate.
2. Check for any obstructions: Open the printer and check if any paper or debris is obstructing the paper path. Clear any visible obstructions carefully.
3. Clean the PE Sensor: Locate the PE Sensor, usually located near the paper path, and gently clean it using a soft, lint-free cloth. Be cautious not to apply excessive force.
4. Reset the printer: Plug the printer back into the power source and turn it on. If the error persists, try resetting the printer to its default settings. Consult the printer’s manual for instructions on how to reset it.
If the error code 0x95 continues to display, it may indicate a more serious issue, such as a failure in the main board. In such cases, it is recommended to contact Epson customer support or a qualified technician to diagnose and repair the printer.
| Printer Model | Epson XP-800-801-802 |
| Error Code | 0x95 |
| Display on | PRINTER |
| Description and troubleshooting | PE detector wrong light emission amount error. PE Sensor failure. Main board failure. |
